PDF HYDRAULIC POWER PUMP PW115 230V HD SERVICE AND OPERATION MANUAL
HYDRAULIC POWER PUMP PW115/230V-HD SERVICE AND OPERATION MANUAL. SERVICE AND OPERATION MANUAL PW115/230V-HD HYDRAULIC POWER PUMP ELECTRIC TWO-STAGE HYDRAULIC PUMP NOTE: Read and carefully follow these instructions. Most problems with new equipment are caused by improper operation or installation. The information presented herein has been compiled from source considered to be dependable and accurate to the best of SPX Fluid Power knowledge; however, SPX Fluid Power makes no warranty whatsoever, expressed or implied, of Merchantability or Fitness for the Particular Purpose, regarding the accuracy of such data or the results to be obtained from the user thereof. SPX Fluid Power assumes no responsibility for the injury to recipient or to the third persons or for any damage to any property and recipient assumes all such risks. Before operating the pump, all hose connections must be tightened with the proper tools. Do not overtighten. Connections should only be tightened securely and leak-free. Overtightening can cause premature thread failure or high pressure fittings to split at pressures lower than their rated capacities. Should a hydraulic hose ever rupture, burst, or need to be disconnected, immediately shut off the pump and shift the control valve twice to release all pressure. Never attempt to grasp a leaking hose under pressure with your hands. The force of escaping hydraulic fluid could cause serious injury. Engineering Controls: For normal application, special ventilation is not necessary. If user’s operations generate vapors or mists, use ventilation to keep contaminants below exposure limits. Make-up air should always be supplied to balance air removed by exhaust. Have eyewash station and safety-shower close to workstation. Personal Protection: Eyes: Eye protection should be determined based on conditions of use. If product is used in application where splashing may occur, the use of safety goggles and/or a face shield should be considered. Hands and Body: Wear appropriate chemically protective gloves and wear appropriate clothing toprevent skin contact. Respiratory: NIOSH approved respirators should be used when airborne contamination is above exposure limits. Feet: Wear appropriate footwear to prevent product from coming in contact with feet and skin. Download: HYDRAULIC POWER PUMP PW115/230V-HD SERVICE AND OPERATION MANUAL
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.